Bego
VarseoSmile Temp 250g
The tooth-colored resin for 3D printing of temporary crown and bridge restorations, inlays, onlays and veneers
Advantages for the laboratory
- Specially for the resin developed printing and processing parameters ensure smooth production sequences with reproducible results at any time
- Easy finishing due to smooth surfaces of the printed objects
- Outstanding dimensional stability and strength of the printed objects precise and dimensionally stable fit
- Extremely short fabrication times and low material consumption equate to cost-efficient production in the laboratory
- Three shades according to the proven VITA* classical shades: A2, A3, C2
- Satisfies all the requirements for a Class IIa* medical device
Advantages for the patient
- The finished restoration can be attached using conventional temporary cements
- High biocompatibility – therefore not cytotoxic, not genotoxic, not toxic, not irritating and not sensitizing
| Color | A2, A3, C2 |
| Density | approx. 1.4 – 1.5 g/cm³ |
| Layer thickness | 50 μm |
| Viscosity | 2,500 – 6,000 MPa*s |
| Flexural strength | ≥ 100 MPa |
| Wavelength | 405 nm |
Share this Product
Other great brands
QUESTIONS & ANSWERS
Ask a Question-
Is it compatible with Uniz slash plus printer?
Only the printers on this link have been validated so far.
https://www.bego.com/3d-printing/compatibility-overview/ -
This material could be use with moonray S100
This is the compatibility list from BEGO
https://usa.bego.com/3d-printing/compatibility-overview/